Small Edge Clamp

The Small Edge Clamp can be clamped onto desks from 18mm (3/4") to 33mm (1 1/4") thick. The clamp is adjustable using a 5 mm allen key to fit your desk thickness perfectly and extends 2 3/8" onto the desk.

Large Edge Clamp

The Large Edge Clamp can be clamped onto desks from 30mm (1 1/4") to 51mm (2") thick. The clamp is adjustable using a 5 mm allen key to fit your desk thickness perfectly and extends 4 1/4" onto the desk.

Cable Grommet

If you have a work surface with an existing cable grommet then this post can be used. Simply remove the grommet from your work surface and replace with the post ensuring that the hole is covered by the new grommet plate.

Through Desk Mount

The Through-desk mounting solution is our strongest mount. This can be installed by simply drilling a 13 mm (0.5") diameter hole in the required surface or fit through an existing hole up to 40 mm (1.5") diameter.

Single Stud Wall Mount

The single stud wall mount is useful to mount a display or iMac directly to a wall to help remove desktop clutter.

Slat Wall Mount

Adjustable slat wall mount will fit standard slat walls.

Puck For Rail Mount ( Puck Only )

The Puck slides in an aluminum extrusion and can be mounted both vertically and horizontally. The arm can then slide to any desired location by sliding the puck along the rail. ** Please let us know if the Rail is mounted Vertically or Horizontally on the wall.

Secured Holder for older models iPad 2, 3 & 4 

Secured holder for the iPad 2, 3 & 4. (Please check your iPad model. This unit does not work with the iPad 1). ** Are you placing a card reader on your iPad? Please let us know this and what make and model of card reader at time of ordering.

Quick Release Holder iPad AIR 1, Air 2, 9.7" Pro, 9.7 5th GEN

Quick release holder for the iPad Air 1, Air 2, 9.7" Pro, 9.7" 5th GEN.

Quick Release Lockable Holder AIR 1, Air 2, 9.7" Pro, 9.7 5th GEN

Quick release Lockable holder for the iPad Air 1, Air 2, 9.7" Pro, 9.7" 5th GEN. Comes with a set of 2 keys