Sidewinder

Product Description

The Sidewinder Monitor Mount provides perfect horizontal movement of monitors and laptops with adjustable tension in each joint. For mobile environments the joints can be set so that they are tight and secure. For office environments, the joints are loosened for smooth, frequent movement.

Every situation is different, and as a result, the Sidewinder was designed to accommodate them all. The Sidewinder comes in various lengths, from Mini to Maxi, so your particular environment can be fitted perfectly.

Sidewinder Assembly Guide

Product Specifications

Sidewinder

Joints	Adjustable, lockable joints
Material	Machined from 60-61 T6 billet aluminum
Screen Tilt	Factory pre-tensioned articulated head
Vesa	Removable 75/100 interface plate
Capacity	Supports monitors up to 12kg (26.5lbs)
Range	Maximum reach of 409mm (16in)

Sidewinder II

Joints	Adjustable, lockable joints
Material	Machined from 60-61 T6 billet aluminum
Screen Tilt	Factory pre-tensioned articulated head
Vesa	Removable 75/100 interface plate
Capacity	Supports displays up to 12kg (26.5lbs) x 2
Range	Maximum reach of 457mm (16in) x 2

Sidewinder III

Joints	Adjustable, lockable joints
Material	Machined from 60-61 T6 billet aluminum
Screen Tilt	Factory pre-tensioned articulated head
Vesa	Removable 75/100 interface plate
Capacity	Supports displays up to 12kg (26.5lbs) x 3
Range	Maximum reach of 457mm (16in) x 3

Wall Mount

Joints	Adjustable, lockable joints
Material	Machined from 60-61 T6 billet aluminum
Screen Tilt	Factory pre-tensioned articulated head
Vesa	Removable 75/100 interface plate
Capacity	Supports displays up to 12kg (26.5lbs)
Range	Maximum reach of 409mm (16in)

Mount Details

Small Edge Clamp

The Small Edge Clamp can be clamped onto desks from 18mm (3/4") to 33mm (1 1/4") thick. The clamp is adjustable using a 5 mm allen key to fit your desk thickness perfectly and extends 2 3/8" onto the desk.

Large Edge Clamp

The Large Edge Clamp can be clamped onto desks from 30mm (1 1/4") to 51mm (2") thick. The clamp is adjustable using a 5 mm allen key to fit your desk thickness perfectly and extends 4 1/4" onto the desk.

Cable Grommet

If you have a work surface with an existing cable grommet then this post can be used. Simply remove the grommet from your work surface and replace with the post ensuring that the hole is covered by the new grommet plate.

Through Desk Mount

The Through-desk mounting solution is our strongest mount. This can be installed by simply drilling a 13 mm (0.5") diameter hole in the required surface or fit through an existing hole up to 40 mm (1.5") diameter.

Single Stud Wall Mount

The single stud wall mount is useful to mount a display or iMac directly to a wall to help remove desktop clutter.

Slat Wall Mount

Adjustable slat wall mount will fit standard slat walls.

Puck For Rail Mount ( Puck Only )

The Puck slides in an aluminum extrusion and can be mounted both vertically and horizontally. The arm can then slide to any desired location by sliding the puck along the rail. ** Please let us know if the Rail is mounted Vertically or Horizontally on the wall.

Adapter Details

Vesa Plate

The standard Vesa plate is designed to fit a variety of standard monitors, displays and TVs. The hole pattern works for both the 75mm x 75mm vesa and 100mm x 100mm vesa. (For the BOA)

Laptop Tray

Heat transferable aluminum laptop tray designed to universally mount laptops.

Keyboard Tray

Keyboard tray designed to universally mount keyboards. 24" x 7.5" x 1/8".